Copper Tube Sizing Calculator

NOTICE:

This copper tube sizing instruction booklet and calculator have been prepared for the use of journeymen, plumbing and heating contractors, engineers, and others involved in the design or installation of fire-sprinkler, plumbing, or solar heating systems. They have been compiled from information sources that the Copper Development Association Inc. believes to be competent. However, recognizing that each system must be designed and installed to meet particular circumstances, CDA assumes no responsibility or liability of any kind in connection with this booklet and calculator or their use by any person or organization and makes no representations or warranties of any kind thereby.

The calculations are based on the Hazen-Williams formula:
Hazen-Williams formula
Where:
P = friction loss, psi per linear foot
Q = flow, g.p.m.
d = average I.D., in inches
C = constant, 150

STEP 1:
Input your calculation variables into the fields and click the calculate button.

STEP 2:
Review the results in the sizing table below.

STEP 3:
Scroll down to the Copper Tube Handbook at the bottom and navigate to the section you need.

Provide the following criteria:
Flow Rate (GPM)
Nominal Tube Size (inches)
in
Pipe Length
ft
Piping Type (ASTM B88)
Pressure Loss
psi
Velocity - Feet Per Second (FPS)
fps
Inner Diameter
in
Outer Diameter
in
Wall Thickness
in
Pressure Loss of Water Due to Friction in Types K, L, M Copper Tube (psi per linear foot of tube)